Writing in a non english language

CatBreath · Post by **CatBreath** » Tue Sep 06, 2005 12:33 pm

I gave up and decided to use the menukey+down instead of CTRL+V.
It works...

If you guys want to get to the bottom of this ill be happy to help anyway.

Thanks for all the help!

wil · Post by **wil** » Fri Feb 28, 2014 1:33 am

JRL wrote:I am also confused as to what is happening.

From your original message, it sounds like you may be switching your keyboard back and forth from English to Hebrew. I've never changed my keyboard to any other language so I'm not sure what goes on when you do that. But I'm wondering if the problem is that when you Press CTRL V through MS while your keyboard is in Hebrew, the "V" has no meaning. You mentioned that when you manually press CTRL V everything works fine. But if you have reset your keyboard to Hebrew when you press "V" you are actually sending some other character.

As an example:

Press CTRL
Send>v
Release CTRL

When the keyboard is in Hebrew would have to be.

Press CTRL
Send>(appropriate Hebrew character)
Release CTRL

I don't really know anything about this and could be totally off. Its just a thought.

Dick

Is it also possible to set or change keyboard language?

Meryl · Post by **Meryl** » Mon Mar 03, 2014 3:31 pm

wil wrote:Is it also possible to set or change keyboard language?

Yes. This post might help:
http://www.mjtnet.com/forum/automatic-s ... 20language

wil · Post by **wil** » Tue Mar 04, 2014 6:44 am

Hi Meryl,

Thank you!