PrettifyScp - Code Clean Up / Indenter

[Marcus Tettmar]

Here's a little script to clean up .scp file indentation:

See my blog post on this here:
https://www.mjtnet.com/blog/2019/01/09/ ... -clean-up/

Code: Select all

//tokens to identify start and end of indented code
Let>incTokens=^IF.*|^SRT\>.*|^REPEAT\>.*|^WHILE\>.*|^ELSE|^ELSE>
Let>decTokens=^ENDIF|^END\>.*|^UNTIL\>.*|^ENDWHILE.*|^ELSE|^ELSE>

//tokens to identify blocks to ignore
Let>inIgnores=^DIALOG\>.*|^VBSTART|^/\*.*
Let>outIgnores=^ENDDIALOG\>.*|^VBEND|\*/.*

//set tab chars
Let>tabs={"  "}

Let>numTabs=0
Let>inIgnoreSection=0
Let>outText={""}

//ask user for input script file
Input>scp_file,Select script file

If>scp_file<>{""}

  //create backup file name
  ExtractFilePath>scp_file,path
  ExtractFileName>scp_file,scp_name
  ExtractFileName>scp_file,scp_name_no_ext,1
  Let>backupfile=%path%\%scp_name_no_ext%.BAK

  //read in script lines to loop through
  ReadFile>scp_file,scp_data
  Separate>scp_data,CRLF,scp_lines

  //if there are lines, loop through them
  If>scp_lines_count>0

    Let>k=0
    Repeat>k
    
      Let>k=k+1
      Let>this_line=scp_lines_%k%

      //Message>To do: %this_line%

      //left trim the line 
      LTrim>this_line,trimmed_line

      //are we going into a section to ignore?      
      RegEx>inIgnores,trimmed_line,0,matches,pIgnore,0
      If>pIgnore>0
        Let>inIgnoreSection=1
      Endif

      If>inIgnoreSection=1
        //if we are in a section to ignore, are we coming out of it?
        RegEx>outIgnores,trimmed_line,0,matches,pIgnore,0
        If>pIgnore>0
          Let>inIgnoreSection=0
        Endif
      Else
        //otherwise we are not in an ignore section so see if we need to do anything  
      
        //should we unindent?
        RegEx>decTokens,trimmed_line,0,matches,dec_nm,0
        If>dec_nm=1
          Let>numTabs=numTabs-1
          //capitalise first letter while we're here
          MidStr>trimmed_line,1,1,fChar
          Uppercase>fChar,fChar
          RegEx>(^.{1}),trimmed_line,0,matches,nm,1,fChar,trimmed_line
        Endif

        //create the indent chars
        Let>indent={""}
        If>numTabs>0
          Let>t=0
          Repeat>t
            Let>t=t+1
            Let>indent=%indent%%tabs%
          Until>t=numTabs
        Endif
        
        //insert indent chars to line to output
        Let>this_line=%indent%%trimmed_line%

        //should we indent further lines?
        RegEx>incTokens,trimmed_line,0,matches,inc_nm,0
        If>inc_nm=1
          Let>numTabs=numTabs+1
          //capitalise first letter
          MidStr>trimmed_line,1,1,fChar
          Uppercase>fChar,fChar
          RegEx>(^.{1}),trimmed_line,0,matches,nm,1,fChar,trimed_line
        Endif

      Endif

      //output the new line 
      Let>outText=%outText%%CRLF%%this_line%

    Until>k=scp_lines_count

    //backup the file
    DeleteFile>backupfile
    CopyFile>scp_file,backupfile
    
    //write output to original file name
    DeleteFile>scp_file
    WriteLn>scp_file,res,outText
    
    MessageModal>Done! Backup saved to %backupfile%
  
Endif

[BAM]

Very nice utility Marcus , but it changes some times variable within %% with a value. See below...

Before:Let>tmp0=WF_TYPE_DESC[%WF_TYPE%]
After: Let>tmp0=WF_TYPE_DESC[1]

Before: Let>strColonna=arrMatchesColonne_%k%
After: Let>strColonna=arrMatchesColonne_459

[Marcus Tettmar]

Ah good catch. Also noticed it adds CRLF at top and bottom. Try this version which fixes these issues:

Code: Select all

//tokens to identify start and end of indented code
Let>incTokens=^IF.*|^SRT\>.*|^REPEAT\>.*|^WHILE\>.*|^ELSE|^ELSE>
Let>decTokens=^ENDIF|^END\>.*|^UNTIL\>.*|^ENDWHILE.*|^ELSE|^ELSE>

//tokens to identify blocks to ignore
Let>inIgnores=^DIALOG\>.*|^VBSTART|^/\*.*
Let>outIgnores=^ENDDIALOG\>.*|^VBEND|\*/.*

//set tab chars
Let>tabs={"  "}

Let>numTabs=0
Let>inIgnoreSection=0
Let>outText={""}

//ask user for input script file
Input>scp_file,Select script file

If>scp_file<>{""}

  //create backup file name
  ExtractFilePath>scp_file,path
  ExtractFileName>scp_file,scp_name
  ExtractFileName>scp_file,scp_name_no_ext,1
  Let>backupfile=%path%\%scp_name_no_ext%.BAK

  //read in script lines to loop through
  ReadFile>scp_file,scp_data
  //temporarily remove percent symbols to avoid unwanted variable resolution
  StringReplace>scp_data,%,~^PERCENT^~,scp_data
  //split to array of lines
  Separate>scp_data,CRLF,scp_lines

  //if there are lines, loop through them
  If>scp_lines_count>0

    Let>k=0
    Repeat>k

      Let>k=k+1
      Let>this_line=scp_lines_%k%

      //Message>To do: %this_line%

      //left trim the line
      LTrim>this_line,trimmed_line

      //are we going into a section to ignore?
      RegEx>inIgnores,trimmed_line,0,matches,pIgnore,0
      If>pIgnore>0
        Let>inIgnoreSection=1
      Endif

      If>inIgnoreSection=1
        //if we are in a section to ignore, are we coming out of it?
        RegEx>outIgnores,trimmed_line,0,matches,pIgnore,0
        If>pIgnore>0
          Let>inIgnoreSection=0
        Endif
      Else
        //otherwise we are not in an ignore section so see if we need to do anything

        //should we unindent?
        RegEx>decTokens,trimmed_line,0,matches,dec_nm,0
        If>dec_nm=1
          Let>numTabs=numTabs-1
          //capitalise first letter while we're here
          MidStr>trimmed_line,1,1,fChar
          Uppercase>fChar,fChar
          RegEx>(^.{1}),trimmed_line,0,matches,nm,1,fChar,trimmed_line
        Endif

        //create the indent chars
        Let>indent={""}
        If>numTabs>0
          Let>t=0
          Repeat>t
            Let>t=t+1
            Let>indent=%indent%%tabs%
          Until>t=numTabs
        Endif

        //insert indent chars to line to output
        Let>this_line=%indent%%trimmed_line%

        //should we indent further lines?
        RegEx>incTokens,trimmed_line,0,matches,inc_nm,0
        If>inc_nm=1
          Let>numTabs=numTabs+1
          //capitalise first letter
          MidStr>trimmed_line,1,1,fChar
          Uppercase>fChar,fChar
          RegEx>(^.{1}),trimmed_line,0,matches,nm,1,fChar,trimed_line
        Endif

      Endif

      //output the new line
      Let>outText=%outText%%this_line%
      If>k<scp_lines_count
        Let>outText=%outText%%CRLF%
      Endif

    Until>k=scp_lines_count

    //swap percent symbols back in ...
    StringReplace>outText,~^PERCENT^~,%,outText

    //backup the file
    DeleteFile>backupfile
    CopyFile>scp_file,backupfile

    //write output to original file name
    DeleteFile>scp_file
    Let>WLN_NOCRLF=1
    WriteLn>scp_file,res,outText

    MessageModal>Done! Backup saved to %backupfile%

Endif